Perfect Fit Blinds
Quicklinks
- Overview
- Perfect fit frame
- Perfect Fit 20mm Pleated Blinds
- Fabrics
- Head Rails & Bottom Rails
- Operation
- Unipleat
- Gallery pictures
Overview
Perfect Fit is a revolutionary new stylish and versatile system of window blind, designed specifically for the modern UPVC window. As the name implies Perfect Fit enables tensioned pleated and venetian blinds to be installed perfectly onto modern UPVC windows, including tilt & turn windows. The result is a simply stunning blind that will enhance the aesthetics of any room.
The blind is fitted within an all round frame which is then fitted to the glass bead without the need for drilling any holes into the window frame.
- Designed for use on tilt & turn windows, conservatories, back doors with narrow frames and most conventional UPVC windows and doors.
- No holes need to be drilled, which means the blind can be removed at any time leaving the window in original condition.
- Simple and easy to operate.
- Fits almost flush with the window frame.
- Enhanced appearance and improved privacy is achieved with each blind.
- Less light entering around the edges of the blind due to the all round frame.
- Choose from 20mm pleated, 16mm/25mm aluminium or 25mm woodslat venetian blinds.
Perfect Fit Frame
The Perfect Fit frame is manufactured from white powder coated aluminium with pre-formed corners and locating holes are punched on the inside flange of the frame to allow the frame to be attached to the installation brackets. The position of the brackets is achieved by holding the Perfect Fit bracket positioning card in each corner of the window frame and then sliding the installation brackets between the glass and the glass rubber.
The actual blind, whether it be pleated, aluminium venetian or woodslat venetian, is fitted to the inside of the Perfect Fit frame, so removing the need for any holes to be drilled into the window frame.
The Perfect Fit frame is then fitted onto the installation brackets by the locating holes in the frame.
Perfect Fit 20mm Pleated Blinds
The Perfect Fit pleated blinds are mounted inside the Perfect Fit frame and have side guide wires which hold the blind firmly in place and allow the blind to be positioned at any point from fully open to fully closed.
Fabrics
The pleated fabrics have ultra slim 20mm pleats and as with Vertical and Roller blinds, the range of fabric patterns and colours that we are able to offer you is vast as we carry ranges from 3 of the largest fabric manufacturers and we have access to virtually all the smaller fabric manufacturers.
This gives you not only a tremendous choice of design in a wide variety of colours but also allows you a choice of fabrics that are:
- Solar Protected
- Flame retardant
- Anti Glare
- Dimout
- Blackout
- Matching Vertical and Roller fabric
Head Rails & Bottom Rails
The head rail and bottom rails we use for the manufacture of Perfect Fit pleated blinds are aluminium and as with the roller blinds, the fabric is locked into these rails thus ensuring that there is no chance of the fabric coming away from the rails. The rails are slim-line in appearance and are available in white powder coated which ensures the rails will match the Perfect Fit frame and the window profile.
Operation
Operation of the blind is achieved by moving the bottom rail down to close the blind and up to open the blind by means of a handle which is fitted to the bottom rail of the blind.
Unipleat
All the pleated blinds that we manufacture are automatically supplied with the unique Unipleat pleat retention system. This ensures that the pleats retain a uniform spacing and the pleats do not drop to the bottom of the blind under gravity.